HELP...How do I integrate my INNOVATE MTX-L wideband gauge into HP Tuners. It has a yellow (Analog out 1) and a brown (Analog out 2).
The yellow is 0V=7.35 AFR and 5V=22.39 AFR. This is the wire I need to integrate into HP Tuners Chart.
Analog output 2 (brown) is 1.1V=14 AFR and .1V=15 AFR (simulated narrowband signal)
I also have the INNOVATE LM-2 with the exhaust clamp. IF the MTX-L is not compatible, can I integrate the LM-2 (only the LM-1 is on the list).
Sold my LM-1 and upgraded to the LM-2. It does have analog inputs and outputs.
Thanks in advance,
Scott