Results 1 to 3 of 3

Thread: Injector question

  1. #1
    Advanced Tuner
    Join Date
    Jan 2014
    Location
    Waldorf MD
    Posts
    774

    Injector question

    Hello

    Does anyone know where I can find injector specs (flow vs kpa, offset, etc) online?

    Thanks

  2. #2
    Advanced Tuner umrjmac's Avatar
    Join Date
    May 2010
    Location
    Lenexa, KS
    Posts
    301
    That depends on the injector that you're chasing data for. There is a fair amount of information available in the forum. You can also usually get pretty good data from the tune repository, particularly if you are looking for stock injector metrics from a different vehicle (LS9 injectors, for example). If you pull data for non-stock injectors from the tune repository, I would also pull a stock tune for the same vehicle and compare data...if they only adjusted the flow rate and left everything else alone then I would keep looking. Also some manufacturers publish their data on their websites (Injector Dynamics comes to mind), although that seems to be pretty few and far between. Finally, Greg Banish's first GM DVD comes with injector data for a handful of common injectors all converted to GM units.
    Kenne Bell Supercharged 2003 Corvette Z06

  3. #3
    Advanced Tuner
    Join Date
    Jan 2014
    Location
    Waldorf MD
    Posts
    774
    Cool. Thanks!