my gauge reads 14.7 and the scanner is reading 12.7 afr , no indication on offset in the instructions , and I used user defined pids noy persets
Thanks
jim
my gauge reads 14.7 and the scanner is reading 12.7 afr , no indication on offset in the instructions , and I used user defined pids noy persets
Thanks
jim
2 thoughts...
the volts to AFR set up correctly in HPT ....
seems like mine defaults to 12.8 on HPT when unplugged from the EIO (? bad connection, ground)
Happy New Year !
yup I have the same thing