Incorrect / Missing Parameters? Let us know

[TobyG]

Any eta on enabling the tow/haul mode adjustments on the f150's?

[Eric@HPTuners]

Any eta on enabling the tow/haul mode adjustments on the f150's?

Next couple of weeks.

[TobyG]

Awesome thanks Eric!

[Eric@HPTuners]

Awesome thanks Eric!

Today's build has Tow/Haul Shift Schedule and TCC lockup and release parameters added to the regular 11-14 F-150 V8 definitions. I'll have it in every truck definition by the end of tomorrow.

[TobyG]

You da man!!! Haha

[Eric@HPTuners]

OK, Tow/Haul stuff is in all the 11+ Truck definitions.

[txcharlie]

Under Fuel > Open & Close Loop > Long Term Fuel Trims, I believe the Min Learn Limit and Max Learn Limit are backwards.

[Eric@HPTuners]

Under Fuel > Open & Close Loop > Long Term Fuel Trims, I believe the Min Learn Limit and Max Learn Limit are backwards.

Please send your file and description to support and we will get that taken care of.

[mattlinke]

WOT Fueling Table, Desired stoich missing from 06 explorer 4.0

There are not many trans settings for the auto. WOT shift points and tq switches only

No matter What i do i cant seem to get it to run more than 13-14* timing at wot. Perhaps its missing spark reference tables or something? (could just be me lol)

[fullthrottle]

WOT Fueling Table, Desired stoich missing from 06 explorer 4.0

There are not many trans settings for the auto. WOT shift points and tq switches only

No matter What i do i cant seem to get it to run more than 13-14* timing at wot. Perhaps its missing spark reference tables or something? (could just be me lol)

I'm glad you posted this. I had the same problem with an explorer. What I did was went into the global spark adder and added timing that way. It worked. Now, let me be the first to say, I don't know 100% if that's the right way to do business but it worked nonetheless. Your question was one I was about to post up myself but I'll wait and see if anyone else responds to yours because; it sounds like it could answer my question as well.

[fullthrottle]

is there a way to set up a commanded lambda vs Actual Lambda Histogram? Also, why is there no line to grab a hold of in the scanner to scroll through the charts?

Thanks!!

[SultanHassanMasTuning]

minimum timing table, still not available

[Eric@HPTuners]

minimum timing table, still not available

On what platform?

[SultanHassanMasTuning]

On what platform?

Mustangs mostly.

[slowbalt09]

Is there any tables for the f150 Ecoboost relating to 4 wheel drive? Anything for the E locker so we can set a different Rpm to be disabled?

[Eric@HPTuners]

Is there any tables for the f150 Ecoboost relating to 4 wheel drive? Anything for the E locker so we can set a different Rpm to be disabled?

Probably. I'll look and see if I can find it.

[uarperformance]

Is there a minimum throttle blade position I am missing on 2014 Mustangs. Didnt see Minimum spark on 14 GT either. New to Fords so I may be looking in wrong area..

[uarperformance]

Do we Request new Ford scanner here or email support/

[Eric@HPTuners]

Is there a minimum throttle blade position I am missing on 2014 Mustangs. Didnt see Minimum spark on 14 GT either. New to Fords so I may be looking in wrong area..

Its in the electronic throttle section

[Eric@HPTuners]

Do we Request new Ford scanner here or email support/

Support