Results 1 to 17 of 17

Thread: Requesting Reads from 2005-2010 Specialty Mustangs

  1. #1
    HPT Employee Eric@HPTuners's Avatar
    Join Date
    Oct 2007
    Location
    Crawfordville, FL
    Posts
    2,409

    Requesting Reads from 2005-2010 Specialty Mustangs

    If you have access to a Roush, Saleen, or vehicle with an FRPP calibration (flashed from a ProCal), please take a read and upload it here with the details of the car. I am adding support so the software will recognize and allow you to edit the tune.

    Thanks
    Eric Brooks
    HP Tuners, LLC

  2. #2
    I have one from an 08 Saleen Red Flag, I'll get it up when I get a chance. How is the 2011+ support coming?

  3. #3
    Saleen.hpt

    The Saleen files I mentioned....

  4. #4
    HPT Employee Eric@HPTuners's Avatar
    Join Date
    Oct 2007
    Location
    Crawfordville, FL
    Posts
    2,409
    Thanks
    Eric Brooks
    HP Tuners, LLC

  5. #5
    Tuner Blown383's Avatar
    Join Date
    Sep 2011
    Location
    New Mexico
    Posts
    157
    I've been looking for a Saleen 302 3v NA tune file to see how Saleen tuned it if anyone has one. Thanks.
    2007 Ford Mustang GT/CS: RGR 322 3v - JPC Intake - Vortech YSi-B - Magnum T56 XL - Built 8.8 - Full Suspension
    2008 Ford Shelby GT500: VMP Gen 2 - ATI 15% - SCJ TB - Full Bassani Exhaust - Full Suspension - Upper Pulley - Meth Injection - JLT 127mm

  6. #6
    Senior Tuner
    Join Date
    Feb 2006
    Location
    South Carolina
    Posts
    1,525
    Eric,

    How about an 07 Harley F150 with a Saleen SC? I have a read from a truck that I can't open to edit.
    Jaime

  7. #7
    HPT Employee Eric@HPTuners's Avatar
    Join Date
    Oct 2007
    Location
    Crawfordville, FL
    Posts
    2,409
    Post it.

  8. #8
    Senior Tuner
    Join Date
    Feb 2006
    Location
    South Carolina
    Posts
    1,525
    Quote Originally Posted by Eric@HPTuners View Post
    Post it.
    Here it is. It fails validation.

    07 F150 Harley Davidson SC_stock read.hpt
    Jaime

  9. #9
    HPT Employee Eric@HPTuners's Avatar
    Join Date
    Oct 2007
    Location
    Crawfordville, FL
    Posts
    2,409
    Currently, we are unable to do anything with files that have the OS ID name modified such as Saleen does. To tune this truck, you would first need to have a stock OEM calibration flashed in, then you could tune it. This is something that will likely be rectified in the future, but for now that is all you can do.

  10. #10
    Senior Tuner
    Join Date
    Feb 2006
    Location
    South Carolina
    Posts
    1,525
    Quote Originally Posted by Eric@HPTuners View Post
    Currently, we are unable to do anything with files that have the OS ID name modified such as Saleen does. To tune this truck, you would first need to have a stock OEM calibration flashed in, then you could tune it. This is something that will likely be rectified in the future, but for now that is all you can do.
    That's fine. This perticular truck ended up getting a JDM mail order baseline tune because we ran into the same issue with Diablo support. The JDM calibration was based on a stock truck calibration, so HP Tuners deals with that file just fine.

    Thanks for trying, though.
    Jaime

  11. #11
    Senior Tuner SultanHassanMasTuning's Avatar
    Join Date
    Nov 2009
    Location
    All Around
    Posts
    3,149
    Saleen file opened up just fine
    Follow @MASTUNING visit www.mastuned.com
    Remote Tuning [email protected]
    Contact/Whatsapp +966555366161

  12. #12
    Advanced Tuner
    Join Date
    Mar 2008
    Location
    Paris, France
    Posts
    435
    2005 Saleen
    Attached Files Attached Files
    http://www.lsxcalibration.com - Lsx Tuning France - Spécialisé Reprogrammation moteur Corvette Camaro Hummer, Ford Mustang et autres véhicules US

    Check our Facebook page http://www.facebook.com/lsxcalibration.com

  13. #13
    HPT Employee Eric@HPTuners's Avatar
    Join Date
    Oct 2007
    Location
    Crawfordville, FL
    Posts
    2,409
    Thanks Brice.

  14. #14
    Tuner in Training
    Join Date
    Apr 2008
    Location
    Alton, IL
    Posts
    25
    2007 Mustang GT 3v Whipple FRPP tune.
    Attached Files Attached Files

  15. #15
    I know you guys are busy with the 5.0. I was curious if you guys were still planning on supporting these calibrations for 05-10. I'm liking the Roush TVS setup but would still really like to be able to tune my car. Even if I send the PCM off to Roush to be flashed.

  16. #16
    HPT Employee Eric@HPTuners's Avatar
    Join Date
    Oct 2007
    Location
    Crawfordville, FL
    Posts
    2,409
    Quote Originally Posted by Exley View Post
    I know you guys are busy with the 5.0. I was curious if you guys were still planning on supporting these calibrations for 05-10. I'm liking the Roush TVS setup but would still really like to be able to tune my car. Even if I send the PCM off to Roush to be flashed.
    Yes the next update will allow you to open and edit those files.

  17. #17
    Quote Originally Posted by Eric@HPTuners View Post
    Yes the next update will allow you to open and edit those files.
    Awesome! Thanks for the reply