Results 1 to 3 of 3

Thread: Corvette VCM write issue

  1. 08-24-2013 #1
    Rat Chevelle
    Rat Chevelle is offline
    Tuner in Training
    Join Date
    Nov 2010
    Location
    Hermosillo, Sonora, Mexico
    Posts
    37

    Corvette VCM write issue

    Hi,
    I´ve got an issue with a 2000 Vette.
    It had a fried ECU when I got here, somebody had already installed a 2000 Tahoe ECU, they both have the same serv no. 09354896.
    I opened the Tahoe ECU and the Vette starrted, however it does not accelerate, I then licences a 2000 Corvette file fromthe repository but it will not let me flash it onto the ECU.
    Am I missing something here? I have read that the 896 is practically the same as the 411.
    Then I tried flashing the Vette fileonto a 411 and it didnot get through.. again big question mark on my head as I have always done that with no problems.
    Any help would be appreciated,
    Thanks
    Luis H Corbala
    Reply With Quote Reply With Quote
  2. 08-24-2013 #2
    danieloneil01
    danieloneil01 is offline
    Tuner
    Join Date
    May 2013
    Location
    Houston
    Posts
    105
    Copy everything from the vette file to the tahoe file. It's time consuming but it works.
    Reply With Quote Reply With Quote
  3. 08-25-2013 #3
    Rat Chevelle
    Rat Chevelle is offline
    Tuner in Training
    Join Date
    Nov 2010
    Location
    Hermosillo, Sonora, Mexico
    Posts
    37
    Well, it turns out I had a lot of pressure from the guy. He had killed the ecu trying to install a superchips (or so he says) so I could not think straight.
    I was getting at it from the quick menu, i needed to do a write entire... I guess i was caught during my five minutes.
    Thanks for the reply, issue solved.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »