Results 1 to 6 of 6

Thread: Holley Hi Ram - Anyone on here done a SD tune with one?

  1. #1
    Advanced Tuner jakebdb56's Avatar
    Join Date
    Oct 2006
    Location
    Houston, TX
    Posts
    646

    Holley Hi Ram - Anyone on here done a SD tune with one?

    Just curious if anyone else out there has done a SD tune with one of these intakes. I really like the way it looks and the potential it has for when I go FI. It's on a stock LY6 for now. I finally got the truck running and exhaust on it to do a little tuning at idle and light revs. The VE numbers I'm getting into seem a bit high, but I've seen this with some big plenum single plane intakes too. Kinda curious what other people have seen with this intake.

    Motor specs :
    Stock LY6 long block
    Vette accessories, aluminum ATI balancer, Edelbrock water pump
    Comp 231/247 cam
    Scorpion LS3 roller rockers
    BRP mid-length headers, 3" collectors and true 3" dual exhaust
    Holley Hi-Ram with 102mm top, LS3 throttle body
    MagnaFuel ProTuner pump, 10AN feed
    80lb @ 4-bar Bosch injectors - running at 40psi base, 50% scaled

    Disregard the boost areas, I'm just dreaming of that part of the VE for now.



    '20 AT4
    '01 Suburban 2500 Dad Wagon

  2. #2
    Advanced Tuner jakebdb56's Avatar
    Join Date
    Oct 2006
    Location
    Houston, TX
    Posts
    646
    Anyone...? lol
    '20 AT4
    '01 Suburban 2500 Dad Wagon

  3. #3
    Tuner in Training
    Join Date
    Oct 2011
    Posts
    19
    I'll have to give you a raincheck... We are about to fire one up.

    408
    PRC heads
    Hi-Ram
    twin 70's
    bosch 160's on e85
    3bar SD on a 1mb OS.
    '02 S10
    0709121237.jpg
    Last edited by tweaker47; 08-19-2013 at 08:03 PM.

  4. #4
    Advanced Tuner jakebdb56's Avatar
    Join Date
    Oct 2006
    Location
    Houston, TX
    Posts
    646
    Nice! I'm kinda jelly, mine is in a first gen S10. Never thought of deleting the corvette alt bracket and relocating it to run twins. Hmmmmmmmmmmmmmmmmm
    '20 AT4
    '01 Suburban 2500 Dad Wagon

  5. #5
    Tuner in Training
    Join Date
    Oct 2011
    Posts
    19
    The cross member has been heavily worked and we added a rack. We are running the f-body AC bracket on the passenger side, electric water pump, and the alternator and fuel pump with the six rib on the drivers side. The bracket is all custom as well as the fuel pump.
    Basically we trying to build a low compression, 117icl cam, no loud energy sucking heat generating fuel pump, AC, turn the key and drive to the track kind of truck. Our goal is 1000rwhp, under 20psi, and an 8 second slip.

  6. #6
    Advanced Tuner jakebdb56's Avatar
    Join Date
    Oct 2006
    Location
    Houston, TX
    Posts
    646
    Quote Originally Posted by tweaker47 View Post
    The cross member has been heavily worked and we added a rack. We are running the f-body AC bracket on the passenger side, electric water pump, and the alternator and fuel pump with the six rib on the drivers side. The bracket is all custom as well as the fuel pump.
    Basically we trying to build a low compression, 117icl cam, no loud energy sucking heat generating fuel pump, AC, turn the key and drive to the track kind of truck. Our goal is 1000rwhp, under 20psi, and an 8 second slip.
    Nice! I hear ya, that's my ultimate goal with this one too.
    '20 AT4
    '01 Suburban 2500 Dad Wagon