Results 1 to 2 of 2

Thread: bog off idle and doesn't pull as hard

  1. #1
    Potential Tuner
    Join Date
    Jun 2013
    Posts
    8

    bog off idle and doesn't pull as hard

    Friend put a cam in his 6.0 truck from texas speed 220r small cam didn't want nothing big just wanted a good idle. He had them tune it after and it never idled right and had a dead spot around 4500rpm. scanned it and seen it was seeing a lot of KR. so I uploaded a stock spark table in it and bumped it up 2*. and don't see any KR anymore but has a bog off idle wont just get up and go. Just wondering if someone can look at this tune and see what else I could do to help him out. Novice tuner still new but learning quick.
    Attached Files Attached Files

  2. #2
    Potential Tuner
    Join Date
    Jun 2013
    Posts
    8
    Here Is the lastest pull took the 2* out.
    josh last pull.cfg
    Last edited by SoSlo07; 07-28-2013 at 05:24 PM.