-
Tuner
Missfire or not?
So I've been noticing an audibly missfire somewhere on the passenger bank, but when scanning for such I am not seeing any missfires.
I'm logging total missfire, missfire current cylinder (1-8) and missfire history cylinder (1-8). All those are 0.
I'm also logging current firing cylinder and it goes 0, 1, 2, 3, 4, 5, 6, 7 then back to 1, 2, 3 etc. It's skipping #8 which is the last one on the passenger side.
Does this mean it's an actual missfire or not? I'm going to try and swap out the wire and coil to a different cylinder and see if then that # is skipped but I have to wait for the headers to cool off.
-
Advanced Tuner
If you remove one of the plug wires and still do not see misfire, something is wrong in your Table Display configuration.