Results 1 to 6 of 6

Thread: russ or any one need info on trans tune 4t65e please help

  1. #1
    Tuner in Training
    Join Date
    Jan 2012
    Posts
    36

    russ or any one need info on trans tune 4t65e please help

    i have a 88 fiero with a 1999 3800 sc engine headers, 1x cam , ported heads, intake and blower 3.2 pulley
    trans is 2003 grand prix gt 4t65e stock 3.29 gear
    I have have 1.00-1 in third gear and speedometer is correct I made adjustments to get them there but not sure I did it the right way
    the problem I am having now is in 3 gear I am getting a rpm surge 50 to 100 rpm up and down
    if you could look over my tune to see what I did wrong I would be greatful
    tire size is 245/45/18
    thanks

    I will post tune below

  2. #2
    Senior Tuner Russ K's Avatar
    Join Date
    Dec 2005
    Location
    Regina, Sask.
    Posts
    4,213
    Why is your gear ratio set to 3.66? Need a scan log & list what frame the issue is at.

    Russ Kemp

  3. #3
    Tuner in Training
    Join Date
    Jan 2012
    Posts
    36
    I started with 3.29 I adusted the rev trans in tell I was able to keep 1.00 - 1 in third gear
    other wise if I kept the 3.29 gear ratio with drive sprocket at 1.00 the it would bounce fom .98 to 1.00 in third gear
    what should I do I know this is the problem just not sure how to fix it

  4. #4
    Senior Tuner Russ K's Avatar
    Join Date
    Dec 2005
    Location
    Regina, Sask.
    Posts
    4,213
    It's normal to have the calculated gear ratio to vary from .98-1.00 in 3rd gear.

    Russ Kemp

  5. #5
    Tuner in Training
    Join Date
    Jan 2012
    Posts
    36
    ok I will change it to 3.69 with 1.121 these get me to .98-1.00 in 3rd gear i changed the 1.00 to 1.121 and i no longer have rpm surge 50 to 100 rpm up and down but now all gears work good but 4 gear over drive when i put it in od and give it enuf throttle it drops to third but slips for a second or two then engages i was thinking that my pressures need to be rasied what do you think thanks for replying back brett wuebker

  6. #6
    Senior Tuner Russ K's Avatar
    Join Date
    Dec 2005
    Location
    Regina, Sask.
    Posts
    4,213
    Read post #4 as to how I firm up the shifts; http://www.hptuners.com/forum/showth...highlight=russ

    Russ Kemp