I've got a 6.0L gen 3 tune I'm working on. I cant figure out why, but at high load it does not seem to be following either the high or low octane main spark tables. I've tried adjusting the min tps and max speed parameters to ensure its using the primary spark tables but nothing in there seems to be working.
I've attached both the config (I've severely retarded the upper portions of the spark maps trying to see if it was using the values at all), and the log. Can anybody shed some light on what I'm doing wrong here?
messed_up_spark_advance_not_retarding_under_boost.hpltesting_escalade_chuck_hubbard_1bar_too_much_advance_pings.hpt