Hi folks,
I'm taking my cam off but still having the bolt ons with the 102 intake manifold
what should I do to the tuning exept changing the idle
notice that the TB is stock
thanks in advance
Moahmmed
Hi folks,
I'm taking my cam off but still having the bolt ons with the 102 intake manifold
what should I do to the tuning exept changing the idle
notice that the TB is stock
thanks in advance
Moahmmed
how does the car run with the cam removed?
Follow @MASTUNING visit www.mastuned.com
Remote Tuning [email protected]
Contact/Whatsapp +966555366161
I think he meant he put the stock cam back in the car ,,,,
To OP ..
IT'S simple retune .. Either work on what you have .. (,wish I what I would do if the old tune was good)
Or work from stock platform
specialize in: V8 Conversion & Tuning (UAE- DUBAI)
supercharge installation
Salah clutches for Nissan, Toyota and GM car
Couple of pointers going from aftermarket camshaft to a stock one ...
Idle fuel...idle spark ...idle AFM ..WOT + MID rang spark ..misfire tables ( depend what cam was in there before) ..
specialize in: V8 Conversion & Tuning (UAE- DUBAI)
supercharge installation
Salah clutches for Nissan, Toyota and GM car
yeah you're right 4evervette the cam still on the car
I think the tune which is on the car right now is good
the should I change what you mentioned ?
Do some logging and see how the car runs... Most probably you won't change alot
specialize in: V8 Conversion & Tuning (UAE- DUBAI)
supercharge installation
Salah clutches for Nissan, Toyota and GM car