I'm sure this is an easy one but how do you remove the ETC torque limit under a stall condition. Only happens with the brake on. When you press the throttle nothing happens until you release the brakes. E38 with 2 bar operating system.
I'm sure this is an easy one but how do you remove the ETC torque limit under a stall condition. Only happens with the brake on. When you press the throttle nothing happens until you release the brakes. E38 with 2 bar operating system.
There is a Brake table in Tq Management that does this exact thing.
Should be Engine / Torque Management / General / Brake Torque Limit
2010 Camaro SS M6. Stock Bottom End, Heads/Cam/Intake/Headers/Exhaust.
2005 Silverado RCSB. Forged 370 LQ9/Borg-Forced Inductions T6 S484/Jake's Stage 4 4L80E with D3 Brake/4WD.
2023 Durango Hellcat
Thanks this thread was somewhat helpful had this issue as well cant wait to try this fix