Results 1 to 16 of 16

Thread: Logging boost 3 Bar SD OS ?

  1. #1
    Advanced Tuner
    Join Date
    Dec 2005
    Location
    Texas
    Posts
    254

    Logging boost 3 Bar SD OS ?

    made a custom PID to log boost, after upgrading to 2.24 now the function doesnt work. I have tried every configuration but to no avail. Please help

  2. #2
    Advanced Tuner
    Join Date
    Dec 2005
    Location
    Texas
    Posts
    254
    And all but 2 tabs in the Histogram are showing Unsupported Parameter, including the preloaded ones. And I'm not seeing a MAP signal in the Chart display. WTF ?

  3. #3
    HP Tuners Support
    (foff667)
    Bill@HPTuners's Avatar
    Join Date
    Jun 2004
    Location
    Hailing from Parts Unknown
    Posts
    28,247
    post your scanner log.
    It doesn't have to be perfect, it just needs to be done in two weeks...

    A wise man once said "google it"

  4. #4
    Advanced Tuner
    Join Date
    Dec 2005
    Location
    Texas
    Posts
    254
    dont know what went wrong
    Attached Files Attached Files

  5. #5
    Advanced Tuner
    Join Date
    Dec 2005
    Location
    Texas
    Posts
    254
    update ?

  6. #6
    HP Tuners Support
    (foff667)
    Bill@HPTuners's Avatar
    Join Date
    Jun 2004
    Location
    Hailing from Parts Unknown
    Posts
    28,247
    You aren't logging map, you need to log it in the table display to actually see it in the other displays.
    It doesn't have to be perfect, it just needs to be done in two weeks...

    A wise man once said "google it"

  7. #7
    Senior Tuner
    Join Date
    Dec 2009
    Posts
    1,084
    You need to ad MAP to MAIN TABLE.
    If you are saying you can not find MAP to be able to ad to MAIN Table then goto your Documents/hptuners/vcm scanner/vehicle and delete your vehicle .os file.
    Then reconnect and it should repoll your vehicle to get them back.

  8. #8
    Advanced Tuner
    Join Date
    Dec 2005
    Location
    Texas
    Posts
    254
    have 3 Bar MAP in the table, that doesnt satisfy the requirement ?

  9. #9
    Advanced Tuner
    Join Date
    Dec 2005
    Location
    Texas
    Posts
    254
    do I delete the entire file or just the ".os" portion of the file ?

  10. #10
    Senior Tuner
    Join Date
    Dec 2009
    Posts
    1,084
    I am not seeing any Map in your primary table, delete the whole file.

  11. #11
    Advanced Tuner
    Join Date
    Dec 2005
    Location
    Texas
    Posts
    254
    it was there before I uploaded the log file, i'll check when I get home

  12. #12
    Advanced Tuner
    Join Date
    Dec 2005
    Location
    Texas
    Posts
    254
    Double checked the Table Settings and it's showing 3 Bar MAP as a parameter, I also deleted the .os files and reconnected to the vehicle but still not fixed. Everything was working fine in 2.22

  13. #13
    Advanced Tuner
    Join Date
    Dec 2005
    Location
    Texas
    Posts
    254
    Uploaded the wrong file, but it wont matter it still doesnt work
    Attached Files Attached Files

  14. #14
    HP Tuners Support
    (foff667)
    Bill@HPTuners's Avatar
    Join Date
    Jun 2004
    Location
    Hailing from Parts Unknown
    Posts
    28,247
    seems to be working fine. You aren't logging RPM so histogram #2 can't work but other than that the software is doing what its told.
    It doesn't have to be perfect, it just needs to be done in two weeks...

    A wise man once said "google it"

  15. #15
    Advanced Tuner
    Join Date
    Dec 2005
    Location
    Texas
    Posts
    254
    All parameters are loaded in the Main Table, when scanning some drop off, i.e. RPM. Also all tabs in the Histogram are now showing Unsupported Parameter

  16. #16
    Advanced Tuner
    Join Date
    Dec 2005
    Location
    Texas
    Posts
    254
    I switched laptops and everything works fine, not sure why the hardware problem all of a sudden