Results 1 to 3 of 3

Thread: 05 vette 50% scaling DW 95LBS

  1. #1
    Tuner in Training
    Join Date
    Mar 2013
    Posts
    35

    05 vette 50% scaling DW 95LBS

    I bought the banish videos and everything is fairley straight forward , I even got deatchwerks to send me their unofficial data in hp's format. the only maps I'm questioning are the ones with a axis of lbs/min? cylinder charge temp bias and filter are one of those. also is there a way to run directly off a 2.5 bar map above 100kpa?

  2. #2
    Senior Tuner DSteck's Avatar
    Join Date
    Mar 2008
    Location
    St. Louis, MO
    Posts
    4,856
    The custom OS will give you a boost VE table to use.

    DSX Tuning - Authorized HP Tuners Dealer
    http://www.dsxtuning.com
    http://www.facebook.com/dsx.tuning
    Just say no to bull s***.
    IF YOU WANT HELP, POST A FILE!

  3. #3
    Tuner in Training
    Join Date
    Mar 2013
    Posts
    35
    Sorry about the double post, I'm not sure how that happened? Still curious about scaling the charge temp table by half or not. Also got a chance to have a initial startup and everything seems good except cranking fuel (way to much), hopefully this is due to the new cam .