Results 1 to 4 of 4

Thread: Fuel Economy

  1. #1
    Potential Tuner
    Join Date
    Mar 2013
    Location
    TX
    Posts
    4

    Fuel Economy

    Hey Guys. Im super new to this. Ive got a little background into messing with this but i was mainly always told to load base tunes and then calibrate of that. What parameters are best to change for better fuel economy. Your help is greatly appreciated.

  2. #2
    Potential Tuner
    Join Date
    Mar 2013
    Location
    TX
    Posts
    4
    is it best to lean out the mixture at the o2 sensors parameters and lower the decel cutoff parameters? This is a stock application. Anyone have any expertise in this area or as to any tips or opinions?

  3. #3
    Tuner in Training
    Join Date
    Feb 2010
    Posts
    34
    What kind of vehicle are you working on? Some have a lean cruise table from the factory that you can turn on and use

  4. #4
    Potential Tuner
    Join Date
    Mar 2013
    Location
    TX
    Posts
    4
    Its a 2010 silverado 5.3 liter. Ive been doing the maf cal setup and timing adv and pe tables for wot. Just learning the software. Im just wanting some more insight from theguys who r more experienced. Where r these tables located?