I have started over my VE tuning now that I have a wideband
During my first log today I noticed my IAC is following my RPM's.
Is it supposed to do this?
Wouldn't this mess with what I am doing here?
I have started over my VE tuning now that I have a wideband
During my first log today I noticed my IAC is following my RPM's.
Is it supposed to do this?
Wouldn't this mess with what I am doing here?
Last edited by aldrichg9; 03-05-2013 at 12:36 PM.
2002 1500HD Cast Iron 6.0, ISKY Cam 218/218 110 lsa, Pace Setter LT's, and some other goodies too...
My VE is also obviously quite screwy and I dont have a stock tune. I bought this truck this way.
Here is one after I pasted some of the error from that log and brought over some stock VE from another tune.
My question is - is my IAC acting the way it should and if not is that skewing what I am doing?
EDIT: Whoa. That was a disaster. Would Barely run that way it idled around 21 AFR
Going to trying a stock VE table and start over - again
Last edited by aldrichg9; 03-05-2013 at 10:45 AM.
2002 1500HD Cast Iron 6.0, ISKY Cam 218/218 110 lsa, Pace Setter LT's, and some other goodies too...
I have been searching all over and looking for this.
I am looking for what the IAC is supposed to do when not at idle.
I thought it was supposed to close, but I can't find anything telling me this.
2002 1500HD Cast Iron 6.0, ISKY Cam 218/218 110 lsa, Pace Setter LT's, and some other goodies too...
The iac counts change with throttle. They go up the more you open the throttle.