Results 1 to 5 of 5

Thread: Help with PE

  1. #1
    Tuner in Training
    Join Date
    Mar 2017
    Posts
    22

    Help with PE

    Can you guys take a look at my PE to see if I made the correct changes? to get around 12.5afr I wanted 40-50% throttle PE so in reading found 15% commanded would get that but I don't think I'm feeling a difference like I did in my 2002. But no wide band on this one to verify.
    Attached Files Attached Files

  2. #2
    Tuning Addict 5FDP's Avatar
    Join Date
    May 2012
    Location
    Rogers, MN
    Posts
    13,565
    If you want to command an AFR around 12.5 you will have to change your EQ ratio to match that.

    Currently it will be as rich as 11.7 AFR commaned. You don't change the fueling with the PE pedal enable table.
    2016 Silverado CCSB 5.3/6L80e, not as slow but still heavy.

    If you don't post your tune and logs when you have questions you aren't helping yourself.

  3. #3
    Tuner in Training
    Join Date
    Mar 2017
    Posts
    22
    Does every atleast check out to where it should be enabled around 40-45% throttle?
    Last edited by jimmyjon; 04-07-2017 at 05:45 PM.

  4. #4
    Tuner in Training
    Join Date
    Mar 2017
    Posts
    22
    Has anyone looked at this to see if I enabled the PE correctly?

  5. #5
    Senior Tuner
    Join Date
    Jan 2014
    Location
    Australia
    Posts
    1,982
    looks like it will enable but the EQratio is all up and down so fueling will follow it, just log EQratio commanded and when it changes from 1.0 to show more fuel then your most likely in PE, just look at that compared to your TPS to see where its enabling at