Is there any way to simulate the narrow band sensor output back to the factory computer while still utilizing the wideband data with HPTuners for tuning?
I'd like to utilize a stock O2 sensor location on my CTS-V without unplugging the stock O2 sensor.
Not without a microcontroller to convert the NGK's output.
DSX Tuning - Authorized HP Tuners Dealer
http://www.dsxtuning.com
http://www.facebook.com/dsx.tuning
Just say no to bull s***.
IF YOU WANT HELP, POST A FILE!
I know my innovate motorsport MTX-L can, but it has the output build into it.
The AFX only has one output, and I assume your using that with HPTuners...
they don't do it very well at all though...Originally Posted by -MD- HHR
as per datasheet it works for the MTX-L but the controller is integrated in the gauge display so the cable has to be provided in the engine bay not so confortable
Innovate LC-1 can do it also, I used it last summer before I had a 2nd bung for the WB. I got it to control well but it took some scaling. The defaults were not so hot.
'12 Camaro T3 2SS/RS LS3 M6, SLP TVS 2300, Flex Fuel
Agreed. Mine works as a narrow band for a while, and then starts getting richer and richer till I recalibrate the sensor.
Reply With Quote
