Results 1 to 5 of 5

Thread: 6L80 L99 Shift times

  1. #1
    Advanced Tuner
    Join Date
    Jul 2008
    Location
    Louisville, KY
    Posts
    417

    6L80 L99 Shift times

    How would I decrease the upshift times? 1-2, 2-3, etc...

    There use to be a "Desired Shift Time - Base Upshift" column but not in the L99 Camaro.

    Thanks

  2. #2
    Should be a table in Shift Time called Shift Time Inertia adder - Upshift Normal and decrease the values around 15-20% at a time until you get it about right for your desire and decrease 5% from that or increase 5% until you get it right. Takes some time but it'll be worth it.

    Hope that helps.

  3. #3
    Advanced Tuner
    Join Date
    Jul 2008
    Location
    Louisville, KY
    Posts
    417
    Quote Originally Posted by gofish7 View Post
    Should be a table in Shift Time called Shift Time Inertia adder - Upshift Normal and decrease the values around 15-20% at a time until you get it about right for your desire and decrease 5% from that or increase 5% until you get it right. Takes some time but it'll be worth it.

    Hope that helps.
    Got it. I thought that might be it. Thanks.

  4. #4
    Advanced Tuner
    Join Date
    Jul 2008
    Location
    Louisville, KY
    Posts
    417
    Actually I have shift time torque adder - upshift normal.

    The only Inertia table I have is the Inertia Factor Profile Upshift under the Shift properties General tab.

  5. #5
    Advanced Tuner
    Join Date
    Jul 2008
    Location
    Louisville, KY
    Posts
    417
    Here is the stock file.