-
Potential Tuner
Trying to add a little fuel
I have been running this timing tune with good luck and I'm trying to add 5% more fuel. After I added 5% more fuel I used the smooth tool. Could someone look at this and give me some thoughts/pointers? I want a little more power out of the ol' Dirty but want it to be "safe" on the stock trans.
Thanks guys.
2000 Chevy S-10, RCSB Stepside,--SWAPPED--5.3L, Ported 241's, 9.2:1 CR, Comp 228/232 .571/.574, FAST92, 90mm TB, BUILT 4L60E, Yank ss4000, Trans cooler, 8.8 LSD 3.73 w/disks, Traction bars, Truck PCM, Tuned w/HPTuners by me, Current Performance Harness, poly motor/trans mount, Headman headers mids, 3" True Duals w/Magnaflow's, CAI, Battery under the bed, Chrome C6 Z06 Deep dish wheels
337HP/304TQ
12.99@106 w/1.91 60' with stock 4L60e, TCI3000 stall and 28" tall tire
-
Tuner in Training
I am running more fuel and timing on a stock trans so I think you will be fine. Did you use the timing calc. after adjusting the fuel? Might run better, did for me.
Reply With Quote