-
Potential Tuner
Hows the timing on my SC LS3 C6?
Hi everyone. First question, I know this is simple but I can't seem to find a straight answer. When someone says "X degrees of timing", what rpm/airmass do they mean?
Specs
2008 LS3 C6 Corvette
Novi 1500SL Centri S/C
~7psi boost
Stock manifolds, no cats
Stock heads/compression etc
Here is my timing table, can someone look it over and make sure I'm not doing anything crazy? Logs show no knock retard.
Timing Table
advTHXance
Last edited by shift; 11-30-2012 at 11:02 PM.
-
Advanced Tuner
link isn't working for me.
-
Potential Tuner
-
Advanced Tuner
do you have any logs? where are you at on the table.. more horsepower you make the lower you are.
-
Potential Tuner
I have some logs, but I dont have access to them right now.
The data I'll collected was from casual driving around town, and some 3rd gear pulls. After I looked at the knock retard histogram I pulled timing where necessary and smoothed out the remaining cells.
I ran the logs through Virtual Dyno, which is estimating around 600rwhp.