Having problem cranking my Truck on 3 bar. Set the maf to 0 and codes po101 102 103 to "0" first error. But still no codes. It just turns on and shuts off my setup it's a 408Ci with a pt88 80lb injectors
Having problem cranking my Truck on 3 bar. Set the maf to 0 and codes po101 102 103 to "0" first error. But still no codes. It just turns on and shuts off my setup it's a 408Ci with a pt88 80lb injectors
Ttt..
2000 silverado yeah did the write entire I'll upload the tune in a bit
That will cause the vehicle not to run if they are check and if p0101, 0102 and 0103 are not set to no mil light.Originally Posted by c.u
he needs to set them to no mil light. I have done this myself on accident where I had one dtc wrong and the car just wouldn't run.
Reply With Quote