Results 1 to 4 of 4

Thread: Take a look at my nitrous tune....

  1. #1
    Tuner in Training
    Join Date
    Apr 2011
    Posts
    17

    Take a look at my nitrous tune....

    2002 Z28
    Cam only
    stock heads
    stock intake
    stock throttle body
    200 shot
    3520 lb raceweight

    Car has been 9.82@138 mph. The tune I ran this time on had all the timing pulled out by 3000 rpm. I have attached a new tune that's a bit more aggressive.

  2. #2
    Tuner in Training
    Join Date
    Feb 2007
    Posts
    33
    I imagine it will go more rich as it goes down track, so I would run the car and then start adding to timing in the upper range to counter some.

  3. #3
    Senior Tuner Ben Charles's Avatar
    Join Date
    Aug 2009
    Location
    Calibrating
    Posts
    3,373
    You should set up the High octane spark table for N/a use and use the IAT spark table to pull spark during spray(resistor mod, working with WOT switch)

    Email Tunes, [email protected]
    96 TA Blown/Stroked, 4L80E/Fab 9
    15 C7 A8 H/C 2.3 Blower/PI
    14 Gen 5 Viper
    Custom Mid Engine chassis, AKA GalBen C

  4. #4
    Potential Tuner
    Join Date
    Aug 2010
    Posts
    8
    PE from 15 kpa?