I just installed a 7.0L in my 02 trans am with 11:1 compression and 42 lb
LS3 injectors. I am currently running the stock fuel pump (which I plan to change to a 255 lph soon) so I am pretty sure the rail is regulated at 4 bar.
In the "injector flow rate vs. kpa" table I am just going to scale the entire row by a number to bring the flow rate at 0 kPa up to 42. In my case it happens to be 1.24. I am going to post the tune for anyone that is interested.
My question is, is this the proper way to tell the PCM what size the new injectors are?