-
Tuner in Training
Scanner jittery... not smooth.. any ideas?
So I was on the dyno today tuning and for some reason when I was scanning the readings were very jittery. Like it would record for one second but then not record, then record, etc etc. On the recordings, everything looked like it had steps.
I restarted, connected, reconnected.. kept happening. I am starting to think it is just a curse of the F body
-
Advanced Tuner
It happens sometimes, I only close scanner, turn key off and restart. Open the scanner and the problem is gone
-
HP Tuners Owner
make sure you are not logging too many PIDs in the table display. If you exceed 24 "bytes" of data the scanner will drop to a lower speed.