Hello all what I have is an 01 s10 with a 5.7 vortec swap with a 4l60. I can not get the gauge cluster to display the transmission position (PRNDL) how can i read in hpt what position the pcm is reading? The truck runs and drives fine. Also is there a way to read cam offset so I can set the distributor correctly?
Cam offset is a pid in the scanner that you add to the table. Also is this a 4l60e or just a 4l60?
My setup is a 356ci with a 260/268 (212/218 at .050 lift) duration cam with aluminium corvette heads and flat top pistons running 11.3 comp. ratio. with tuned port injection and vortec crank pick up and dizzy running a 411 pcm and 60lb bosch injectors, 1.6 ratio roller rockers.For transmission its a 4l65e built with the monster in a box mega ss kit.
All in a 92 chevy ext cab 4x4 pickup with a 98 cab now installed with a third door!
running only e85
it is a 4l60e and I was looking for the pid but could not find it, do you know which drop down menu it is under?
I'll look in a while
My setup is a 356ci with a 260/268 (212/218 at .050 lift) duration cam with aluminium corvette heads and flat top pistons running 11.3 comp. ratio. with tuned port injection and vortec crank pick up and dizzy running a 411 pcm and 60lb bosch injectors, 1.6 ratio roller rockers.
Reply With Quote