Results 1 to 5 of 5

Thread: 2010 5.3 Silverado DOD/AFM disable

  1. #1
    Tuner in Training
    Join Date
    Oct 2009
    Location
    Alberta
    Posts
    23

    2010 5.3 Silverado DOD/AFM disable

    Hey guys, quick question.

    After reading all the debates on these engines oil-use issues, I've basically come to the conclusion that I want to tune out my DOD/AFM to hopefully have long engine life with no oil use issues....

    I know I hit the cell "disable" by the DOD, but what codes to I need to disable?

    Basically I was wondering if anybody had a dumbed down explanation of how to kill the DOD on these trucks?

    Thanks.

    2008 LS3 M6 corvette. Headers, no Cats, Airraid intake, 160 degree thermostat, 230/234* cam, 125hp N20 shot

    2006 LBZ duramax 5" exhaust, boost fooler, Bully dog pmt, 6" lift, 37" rubber on 20" rims, and maybe some HP tuning...

    2010 Chevy 1500 reg cab SB 4x4 , 5.3, Magnaflow cat back, 24's, 2" drop, K&N element, custom leather

    1988 S10 Blazer- Vortec 383, built 700R4, doubler, front 3 link with 14" CO's, rear 4 link, 42" Iroks. 35 spline 4340 D60's front and rear.

  2. #2
    Shouldn't need to disable any codes. Simply "Disable"

  3. #3
    Tuner 4evervette's Avatar
    Join Date
    Jan 2008
    Location
    dyno room
    Posts
    169
    That's correct , you Only need to disable the code if you will delete the DOD mechanically
    specialize in: V8 Conversion & Tuning (UAE- DUBAI)
    supercharge installation
    Salah clutches for Nissan, Toyota and GM car

  4. #4
    Tuner in Training
    Join Date
    Oct 2009
    Location
    Alberta
    Posts
    23
    perfect, I wasn't sure. Half the posts I found must have been talking about doing the actual "delete" of the lifters and solenoids, thus requiring code work.

    Thanks guys.

    2008 LS3 M6 corvette. Headers, no Cats, Airraid intake, 160 degree thermostat, 230/234* cam, 125hp N20 shot

    2006 LBZ duramax 5" exhaust, boost fooler, Bully dog pmt, 6" lift, 37" rubber on 20" rims, and maybe some HP tuning...

    2010 Chevy 1500 reg cab SB 4x4 , 5.3, Magnaflow cat back, 24's, 2" drop, K&N element, custom leather

    1988 S10 Blazer- Vortec 383, built 700R4, doubler, front 3 link with 14" CO's, rear 4 link, 42" Iroks. 35 spline 4340 D60's front and rear.

  5. #5
    Advanced Tuner
    Join Date
    Nov 2007
    Location
    Minnesota
    Posts
    559
    I only have DOD enabled above 45mph and have no oil consumption issues.
    2012 Chevy Cruze A6 1LT RS

    Formerly - 2004 GTO, 2002 Z28, 2007 Colorado, 2008 Silverado