I had my motor rebuilt and a 212 218 low lift cam installed. Is there a better setting for the high/low rpm thresh then 2400 or should i leave it where it is. This is the rpm that the ve tables take over correct? Or is it the other way around?
I had my motor rebuilt and a 212 218 low lift cam installed. Is there a better setting for the high/low rpm thresh then 2400 or should i leave it where it is. This is the rpm that the ve tables take over correct? Or is it the other way around?
99 silverado 1500 5.3, 30 over, all new ported, polished, and milled heads 30 thou, 220 226 custom BEI cam. 2" intake valves, ported & polished TB, Long tube ceramic coated headers, magna flow cats, y pipe, 3" magnaflow, vera ram air intake, I6 TB stall, All new Drivetrain, 3 Trans coolers, Auburn E-Locker, 4.56 gears, Throttle body bypass, Flex-a-Lite E-Fans, LS1 e-fan harness, ASP Under Drive Pullleys, HP Tuner Pro. 1 Bar MAP SD OS upgrade. Amsoil EA Bypass Oil Filtration system.