Innovate LC-1 to replace narrowband on LS3

[Iam Broke]

Greetings, I searched and found the info for the LC-1 outputs so I can replace my bank 1 02 with the LC-1 WB, but I was wondering if anyone made a connector to mate the factory harness to the Innovate wiring? I have an old NB 02 from an '02 LS1 but haven't looked to see if it's the same. Anyone know?

A wiring diagram of the 02 pinouts & colors on the '12 LS3 would be helpful.

I'll have to determine which 02 heater DTC's to kill also I suspect.

I have to upgrade to HPT Pro before I start tuning, but I wanted to get my ducks in a row and I don't want to hack up the factory harness.

I'll be tuning in Lambda as I'll be running E60 with a 11.25 stoich and found the LC-1 output is .5l @ 0v& 1.523l @ 5v.

Any guidance is appreciated.

[Iam Broke]

Well, the connectors are certainly different. I found one that I think will serve the purpose, but now I need to locate the pinouts as the colors are different on this pigtail than my car.

http://www.ebay.com/itm/05-12-LS2-LS...-/360461880675

[Iam Broke]

A friend of mine came through, so I'll share the 02 wiring diagram in case someone else needs it.