Greetings, I searched and found the info for the LC-1 outputs so I can replace my bank 1 02 with the LC-1 WB, but I was wondering if anyone made a connector to mate the factory harness to the Innovate wiring? I have an old NB 02 from an '02 LS1 but haven't looked to see if it's the same. Anyone know?
A wiring diagram of the 02 pinouts & colors on the '12 LS3 would be helpful.
I'll have to determine which 02 heater DTC's to kill also I suspect.
I have to upgrade to HPT Pro before I start tuning, but I wanted to get my ducks in a row and I don't want to hack up the factory harness.
I'll be tuning in Lambda as I'll be running E60 with a 11.25 stoich and found the LC-1 output is .5l @ 0v& 1.523l @ 5v.
Any guidance is appreciated.