Wiring an EIO plug into the AEM UEGO wideband, need help!

[Fast99FRC]

Hello all. Did a search and couldn't find a definitive answer to my problem.

Yeah, I am a new guy here and this is my first post. I recently bought a fully built supercharged 99 FRC. A friend of mine is doing a retune on it because of the climate change and we added a bit more meth. Anyway, I need to know how to wire up the green EIO plug. I was told I can wire it right off the wideband gauge harness and that it was two wires (I believe pin 5 will be a ground right?) Thanks for any help in advance.

The car has an AEM UEGO wideband and the gauge has two connectors, a 6 pin and 4 pin and has an electronic readout. Thanks again!

-Brent

[flame]

The white wire on the 4 pin con is the 0-5 volt output from the AEM. Put it to pin 1 on the EIO and 5 to the same ground as the AEM