Hey guys, I am rather new to the tuning world but have done two cars with cam swaps so I'm somewhat getting the hang of it.

Along comes a completely new project that I am really hoping a few of you could look at the work I've done. The car is a L33/T56 swapped Mazda RX-7 with a 1999 LS1 cam/intake/TB/Injectors and an 0411 PCM.

The tune I am starting with is a 2002 LS1/T56 tune; I am planning on running speed density. I have done the following work:

Engine size was changed for 5.3L cylinder displacement

Idle values bumped up to 950

Base running airflow set to 5.3L values and added 3 g/sec for startup tune w/cam

Set all injector values to the correct values for the '99 injectors that came with intake manifold

Set spark advance values to the 5.3L values

Set VE table to 5.3L values

Any other input? I've attached the frankenstein tune for your reference.