"Try with smaller values for the enable TPS. From memory it's the same weird ETC % area - idle offset % the LS2 uses. Ie. You need to set it to values like 15-20% for tradtional TPS/ETC% of 40-50%"
On my 2010 Camaro LS3:
Actual:
30% TPS PE = 60% in the log
5% TPS PE = 33% in the log
My questions:
1) Has there been an update to this mis-calculation? From what I can tell this is carryover from LS2.
2) What other tables list incorrectly?
Thanks