I had 3.70 gears installed the other day, and Im setting up my transmission shift points. i auto scaled the trans settings using the tool in the software, but its all jacked up now.
ive pretty much got it sorted out, but i ran into an issue that i cant figure out.
what i want is the car to drive at lower speeds in a specific gear while the car is in normal mode (d). i want it to cruise around 35 mph in 4th gear, then shift into 5th at around 42 mph, and 6th around 55. i left sport and manual mode alone.
what im getting is the trans does wtf it wants to, as if the settings im entering are basically being ignored. i logged it, and it goes into 5th gear at 35 mph.
can someone take a quick look at this, and check if im missing anything?