Got another ECM and the clicking went away. I did a security relearn and was able to turn it over.
I read the ecm and everything was operating fine.
I went to write entire and about 2min into the flash, the damn clicking crap came back. Now Im back in the same boat, but this time I have two ECMs that are messed up.
Im really lost now, will be emailing support
2008 Twin turbo TBSS, Precision 6766, 385 LS2, ID2000s
Unable to locate VCMOriginally Posted by Chris@HPTuners
2008 Twin turbo TBSS, Precision 6766, 385 LS2, ID2000s
Maybe the file you are trying to write is for wrong vehicle? or corrupted?
Wierd.
The file you are trying to write, where did you get it? or was it the stock you modified?
maybe post suspect file to be looked at.
here is the file,
2008 Twin turbo TBSS, Precision 6766, 385 LS2, ID2000s
Well I doubt it would cause you issue but first thing I noticed is the file has an engine displacement of 1.5liters.
Do you have the stock file?
tune is scaled 75% for ID2000s
here is pretty much stock file
Last edited by jpracing01; 07-30-2012 at 12:15 PM.
2008 Twin turbo TBSS, Precision 6766, 385 LS2, ID2000s
I was able to recover the ECM by bench flashing it but the pwr relay still clicks away when it is installed in the vehicle.
2008 Twin turbo TBSS, Precision 6766, 385 LS2, ID2000s
Reply With Quote