-
Tuner in Training
New ECU in GTO now it wont start
as the title says, i put a new ECU in my mother's GTO because the stocker was locked by some dingleberry with a handheld tuner i am guessing.
it is an 06 with a maggie 112 and a cam. i swapped a 12243864 for the same from an 06 SSR.
i turned VATS off but still no start. any help?
derek
-
Tuner in Training
apparently you need to have a tech 2 and a tis 2000 to initiate the crank position learn procedure.
i found this on the gto forum.
http://www.gtoforum.com/f3/anyone-re...m-05-gto-6769/