E-Force IAT sensor values off?

[ccrp]

I just finished a E-Force Camaro and I never see IAT temps below 50 deg C. I used the edelbrock TMAP sensor values like on their hand held.

However, when touch the intercooler water it is cold. We tried to water spray intercoolerradiator to the point that fluid has only 25 deg C, still not going below 50 deg C which can't be right.

here is the stock Edelbrock file

http://www.hptuners.com/forum/showthread.php?t=38386

any change from previous IAT calibrations with their kits?

[NTIMID8]

They have used 2 different tmaps and the IAT scaling is different between them. My guess is you have the Cal for the other tmap installed.

[yonson]

What is your MAP sensor reading at KOEO? If it's not ~100kpa then you probably have the wrong TMAP calibration. Depending on what serial number your supercharger is will determine which TMAP sensor you have.

http://www.edelbrock.com/automotive_...rce_tmap.shtml

[Redline MS]

The later TMPA (one bolt) does not require the IAT transfer function to be changed....the earlier one did.

The first one was a Ford designed sensor and the newer one is direct from Bosch.

Howard