Results 1 to 3 of 3

Thread: 11 Camaro SS LG G6X3 - Yank 3600

  1. #1
    Potential Tuner
    Join Date
    Jun 2012
    Posts
    2

    11 Camaro SS LG G6X3 - Yank 3600

    Mods:
    LG G6X3 cam
    yank 3600 stall
    K&N CAI
    Under drive pully
    headers and exhaust
    3.91 gears
    ported throttle body
    L99 to LS3 conversion
    Fuel Crossover hose (replaces hose from main fuel feedline to fuel rail)

    Does a perfect tune exist or is it more of a "that'll do" mentality? That being said, I've pieced together a tune from various locations to try and get the best out of the mods listed above. I welcome any advice and assistance as I'm a novice tuner.

    Thanks!

  2. #2
    Advanced Tuner vette_c6's Avatar
    Join Date
    Jun 2008
    Location
    Kuwait
    Posts
    390
    Well
    If u are new on tuning
    Its very wrong to start with g6x3 camshaft
    And also a after market stall
    Which is mean u need to modify the gear tables

    U can do it perfect
    It can be done perfect
    It will take time

    Good luck

    Shot a scanner log before start run scanner
    Then star car
    Shot your DTC's codes
    Lets have a look

    specialize in: V8 Tuning (Kuwait)
    Abdullah Al-najdi
    00965 99369929
    www.youtube.com/alnajdi83
    Tuners ! Quit Raping your PE TABLE !
    instagram : alnajdi83
    best number in 1/8 mile 4.54 ( My Driving + My Tune ) !

  3. #3
    Potential Tuner
    Join Date
    Jun 2012
    Posts
    2
    vette_c6,

    I will get those DTC's done today. Thanks for the reply.
    I tried to have the car tuned by a shop but that failed.