Results 1 to 2 of 2

Thread: HP numbers using scanner

  1. #1
    Potential Tuner
    Join Date
    May 2012
    Location
    Cali
    Posts
    8

    HP numbers using scanner

    My cousin, fellow member "LEDbetter," set up a histogram to measure horsepower. I use this as basis for a guage to track it. My question is: do these numbers represent RWHP? It's definitely closer to that figure than it would be at the crank. Just intersted as to the accuracy.
    Thanks

  2. #2
    The horsepower one doesn't look like it represents horsepower, maybe torque, it gives the highest numbers at around 4500RPM which would be around peak torque, if it were horsepower the highest numbers would be closer to max RPM than they are.
    Last edited by Xjas; 06-08-2012 at 06:03 AM.
    2010 GXP Maloo ute, LS3, 6L80E.
    MM heads, 240/252@50 solid cam, 12.75:1 compression, 4500 Dominator converter, 3.46 rears.
    Shooting for 10s eventually.