Ford FX 4 2010

[cmt_cibarra]

Tried to get the ecm flash to be read and I get the following error



turn the igintion off for 3 seconds and try again.

I able to scan.. but it is so slow..

any advice

[bartender_77]

Tried to get the ecm flash to be read and I get the following error



turn the igintion off for 3 seconds and try again.

I able to scan.. but it is so slow..

any advice

2010 f150 aren't supported as far as i know, only the 04-08 model years are covered, so im sure that the problem