i've been searching and searching but i can't seem to find any info. how do you go about making the ls3/l92 knock sensors work when swapping into like my 04 tahoe. i read one thread that said to use the stock sensors but on the side of the block after tapping out the mounts. but how accurate/reliable does that leave them? is there anyway to do a segment swap for the stock ls3 sensors into my computer? everthing else in the swap seems to be easy. get a strocker crank with a 24tooth wheel and a ls2 cam with front cover sensor. but i'm going boosted and would really like my knock sensors to be reliable.
thank for the help and if there is a thread i missed feel free to post it up please.