What is the best way to setup WB to rread as smooth as possible in HP. I have my WB set to read 7.4-22.4 and sample 1/3 but its still very rough.. any tricks to set HP to react slower ?
What is the best way to setup WB to rread as smooth as possible in HP. I have my WB set to read 7.4-22.4 and sample 1/3 but its still very rough.. any tricks to set HP to react slower ?
anyone?
Buy a better wideband.
DSX Tuning - Authorized HP Tuners Dealer
http://www.dsxtuning.com
http://www.facebook.com/dsx.tuning
Just say no to bull s***.
IF YOU WANT HELP, POST A FILE!
^^^ LMAO!
Let me take a guess Innovate LC-1? I experimented on some honda's back in the day when I was using an LM-1 using filtering capacitor's in the ECU on the input that I used for the analog output. I do not recall exactly what microfarad size that I used but you have to be very careful with selection because it will slow the response from ACTUAL lambda change on the output. Obviously the lower the uF the more responsive it'll be but the less it'll filter.
James Short - [email protected]
Located in Central Kentucky
ShorTuning
2020 Camaro 2SS | BTR 230 | GPI CNC Heads | MSD Intake | Rotofab | 2" LT's | Flex Fuel | 638rwhp / 540rwtq
2002 Camaro | LSX 427 | CID LS7's | Twin GT5088's | Haltech Nexus R5 | RPM TH400
Reply With Quote