What is the best way to setup WB to rread as smooth as possible in HP. I have my WB set to read 7.4-22.4 and sample 1/3 but its still very rough.. any tricks to set HP to react slower ?
What is the best way to setup WB to rread as smooth as possible in HP. I have my WB set to read 7.4-22.4 and sample 1/3 but its still very rough.. any tricks to set HP to react slower ?
anyone?
Buy a better wideband.
DSX Tuning - St. Louis, MO
Injector Dynamics dealer/supporter/lemming
Need a plug-and-play 2.5 or 3 bar LS1/2/6/7 MAP sensor? PM me
http://www.facebook.com/dsx.tuning
^^^ LMAO!
Let me take a guess Innovate LC-1? I experimented on some honda's back in the day when I was using an LM-1 using filtering capacitor's in the ECU on the input that I used for the analog output. I do not recall exactly what microfarad size that I used but you have to be very careful with selection because it will slow the response from ACTUAL lambda change on the output. Obviously the lower the uF the more responsive it'll be but the less it'll filter.
Reply With Quote
ShorTuning
