Results 1 to 6 of 6

Thread: NGK AFX mnitor sensor?

  1. #1
    Advanced Tuner =fast='s Avatar
    Join Date
    Jan 2009
    Posts
    396

    NGK AFX mnitor sensor?

    Well guys my sensor form my wideband is out when i connect it the only thing it shows its sen1, on the instructions it says to replace sensor.

    I was looking them at the Ballenger Motorsports since i bought my wideband there and it shows 2 different ones, What are the difference?

    Bosch LSU Wideband O2 Sensor ( UEGO ) with NTK/NGK Connector for NGK Powerdex AFX
    http://www.bmotorsports.com/shop/pro...roducts_id/349


    NGK / NTK Wideband O2 Sensor ( UEGO ) for NGK Powerdex AFX, OEM replacement & other wideband systems - NGK PN 24302
    http://www.bmotorsports.com/shop/pro...roducts_id/352

  2. #2
    one is a bosch and one is the NTK, I like the NTK sensor better.

    however if you do some research, my 2005 honda uses the same NTK 24302 sensor, but it is available for under $100 ordered as a Bosch 15401 (NTK sensor in a bosch box)

    Ryan

  3. #3
    Senior Tuner DSteck's Avatar
    Join Date
    Mar 2008
    Location
    St. Louis, MO
    Posts
    4,856
    As mentioned, the Bosch P/N 15401 is the NTK sensor. You can get it at autozone.

    DSX Tuning - Authorized HP Tuners Dealer
    http://www.dsxtuning.com
    http://www.facebook.com/dsx.tuning
    Just say no to bull s***.
    IF YOU WANT HELP, POST A FILE!

  4. #4
    Advanced Tuner =fast='s Avatar
    Join Date
    Jan 2009
    Posts
    396
    So both of them read the same air fuel or one is more accurate?

  5. #5
    Senior Tuner LSxpwrdZ's Avatar
    Join Date
    Dec 2008
    Location
    on the Dyno
    Posts
    1,825
    In my experience the NTK lasts longer than a bosch and is a little more resistant to leaded fuels.
    James Short - [email protected]
    Located in Central Kentucky
    ShorTuning
    2020 Camaro 2SS | BTR 230 | GPI CNC Heads | MSD Intake | Rotofab | 2" LT's | Flex Fuel | 638rwhp / 540rwtq
    2002 Camaro | LSX 427 | CID LS7's | Twin GT5088's | Haltech Nexus R5 | RPM TH400

  6. #6
    Advanced Tuner Screamn03's Avatar
    Join Date
    Feb 2004
    Location
    Vacaville, CA
    Posts
    832
    If you have the AFX can you run either sensor and the controller will recognize it? In other words, if you have an AFX with Bosch sensor can you replace the Bosch sensor with the NTK one and it will work?
    -Michael Rudolph-
    2003 Redfire Cobra
    Eaton Powered to a:
    11.301 @ 129 1.68 60' MT DRs
    11.85 @ 124 1.90 60' street tires