Results 1 to 8 of 8

Thread: unsupported parameters?

  1. #1

    unsupported parameters?

    Ive been trying to set up the scanner so that I can tune the MAF. I set it up just like Greg B does in his video. I keep getting unsupported parameters. Ive emailed support. They said I need to include the Afr commanded Hi Res. and be connected to car while doing it. I still get the same thing. Since you cant save a custom pid set up Im not sure what to post so you can see. Any Ideas would be helpful. Im missing something just not sure what. A PM or a phone call would be nice, dont know anybody else to bounce ideas off of.

  2. #2
    Tuner longboxdime's Avatar
    Join Date
    Sep 2011
    Location
    birthplace of GM- Flint, MI where the water is heavy
    Posts
    64
    What order do you have them listed in your table?

  3. #3
    from top to bottom is Afr commanded hi res,commanded lambda, then lambda err

  4. #4
    Tuner longboxdime's Avatar
    Join Date
    Sep 2011
    Location
    birthplace of GM- Flint, MI where the water is heavy
    Posts
    64
    Where is the wideband in this list?

  5. #5
    maybe this will helpAttachment 33991

  6. #6
    Fixed it! When I was adding the Air Fuel Ratio Commanded Hi Res, I was adding it wrong. I was doing it the same way as the custom pids and user defining it, didnt know it was under engine/fuel/air fuel ratio. Still learning!

  7. #7
    Tuner longboxdime's Avatar
    Join Date
    Sep 2011
    Location
    birthplace of GM- Flint, MI where the water is heavy
    Posts
    64
    Ok good! I got called into work so I left ya hanging. Sorry brother!

  8. #8
    No prob, I was able to tune the MAF today and it turned out pretty good. Thanks for the reply.