Results 1 to 8 of 8

Thread: Turbo install ready to tune!!!

  1. #1
    Advanced Tuner
    Join Date
    Jun 2010
    Location
    .....
    Posts
    559

    Turbo install ready to tune!!!

    We finish installling a turbo to a 2010 silverado, Its a 76mm on a stock 5.3
    Heres my file want to be sure if its on pure MAF, just waiting on the injectors and the scanner that i did with the file stb1 n 2 are way off.

  2. #2
    Advanced Tuner
    Join Date
    Jun 2010
    Location
    .....
    Posts
    559
    I dont get why my stb1 and 2 are still on...

  3. #3
    Senior Tuner edcmat-l1's Avatar
    Join Date
    Aug 2006
    Location
    5BA8
    Posts
    3,051
    It's in MAF mode. You still have fuel trims because your O2 readiness ECT isn't set correctly. Set that to 400 or something unachievable.

    FWIW, I don't like setting things to zero (your dynamic airflow). I'd rather there be something in there, like 200 or something.

    EFI specialist
    Advanced diagnostics, tuning, emissions
    HPtuners dealer and tech support
    email=[email protected]

  4. #4
    Advanced Tuner
    Join Date
    Jun 2010
    Location
    .....
    Posts
    559
    O2 readiness ECT its at -40, change it up to 400?

    Heres the update file.
    Last edited by 02Ls1; 05-29-2012 at 01:19 PM.

  5. #5
    Advanced Tuner
    Join Date
    Jun 2010
    Location
    .....
    Posts
    559
    My stb1 and 2 were way off because one of the injectors was not sitting down right, about to log it see what it does still eaiting if my file is good to go...

  6. #6
    Advanced Tuner
    Join Date
    Jun 2010
    Location
    .....
    Posts
    559
    I upload the file and took off the bank 2 sensor 1 off of my down pipe to install the wideband, now i getting codes that are from the sensor i took off is this normal till i install it back?

    p0050
    p0154
    po155

  7. #7
    Senior Tuner edcmat-l1's Avatar
    Join Date
    Aug 2006
    Location
    5BA8
    Posts
    3,051
    Quote Originally Posted by 02Ls1 View Post
    I upload the file and took off the bank 2 sensor 1 off of my down pipe to install the wideband, now i getting codes that are from the sensor i took off is this normal till i install it back?

    p0050
    p0154
    po155
    Set those codes to 'no error reported'. Done.

    EFI specialist
    Advanced diagnostics, tuning, emissions
    HPtuners dealer and tech support
    email=[email protected]

  8. #8
    Advanced Tuner
    Join Date
    Jun 2010
    Location
    .....
    Posts
    559
    Thanks...