Results 1 to 4 of 4

Thread: Vats

  1. #1
    Potential Tuner BigR's Avatar
    Join Date
    Feb 2011
    Posts
    9

    Vats

    I have a 2007 Chevrolet Colorado 3.7 and I know our trucks don't have vats but pass lock. So to disable pass lock do I disable VATS in HP Tuners?

  2. #2
    Potential Tuner
    Join Date
    May 2012
    Location
    Ohio
    Posts
    5
    I have an 04' Colorado with the 3.5, and I'm doing an LS1 swap. I am getting ready to disable VATS, which according to what I have read is theftlock or a version of it. Hopefully someone else will chime in.

  3. #3
    Potential Tuner
    Join Date
    May 2012
    Location
    Ohio
    Posts
    5
    Okay I finally got communication to the ECM, and I disabled vats. It must also kill the vats signal in the bcm too, because I am running an ls1 computer with the Colorado bcm and no security problems!!! I actually fired up the engine yesterday, it is a mean sounding motor cammed!!!!

  4. #4
    Potential Tuner BigR's Avatar
    Join Date
    Feb 2011
    Posts
    9
    Yea I figured it out but could not disable it because HP Tuners does not wo4rk for most 07 Colorado's. I tried to write to 2 trucks and it will not work, same problem. Makes me wonder why I purchased it.