2001 Denali LQ4 drive by wire

[xpzd3800]

I am working on a motor swap, trying to get this thing running.
the 6.0 was originally a drive by wire, we have installed a cabled TB.
I have wired the pins into the PCM for the IAC and TPS
what are the next steps?

thanks for the help

[Asylumwarp]

uhmm... Start it? Just sayin...

[Montecarlodrag]

The next step is to check if you have a PCM capable of controlling the IAC for the DBC throttle body.
The only way to know for sure is to open it and look for a specific component. Check this thread for more info:
http://ls1tech.com/forums/conversion...v-hwd-nos.html

Next step is to find the correct stock tune file for your needs and start tuning.

Which car is the engine into?

[acehaag]

all 01 pcms are capable of running a cable tb. go into your system/system options and change the 1 under etc to a 0 and you should be good to go.

[cuba6942]

Im doing the same swap, only mine is a 2002flex fuel 5.3 dbw. I want to go. Dbc. What pins do i need to wire to pcm.. please help..sorry for thread jacking..