Histography configs not working

[01PewterDropTop]

I have configured my histogram just like the one in the repository labled gtptuningmaf, I have the same engine in my camaro. when i hit start scan table 6, 7, and 8 go blank in the histog and display this message

This Histogram is not supported with the current loaded parameters.

If this Histogram references Tables, it is possible that the vehicle
you are connected to does not support these Tables. It is also possible
that the sensor required for the Table is not found in the loaded
parameters.

If this Histogram references Sensors, it is possible that the sensor
required is not found in the loaded parameters.

If this Histogram references PIDs, it is possible that the PID required
is not found in the loaded parameters.

You will find all of your loaded parameters located on your Table Display.
To add more parameters, right click the table display and click insert.

For example, if you have a histogram built that maps Timing Advance
and you do not have Timing Advance inserted on your Table Display,
the Histogram will not function.

[01PewterDropTop]

How do i attach a file?

[Rynoman2k3]

You probably don't have everything setup right. So you have a l67 or l32 in your Camaro with the Supercharger and all ?

[Wingman520]

You probably don't have everything setup right. So you have a l67 or l32 in your Camaro with the Supercharger and all ?

i know they made the 3.8l v6 in the camaro for the 4th gen but never supercharged because of the clearance issues with the firewall area and stuff you'd have to relocate and such afaik...


attaching a file if you scroll down in additional options you'll see manage attachments then a window will pop up and then find your file on the pc and boom uploaded

[Rynoman2k3]

I've seen some retrofitted that's why i asked.

[01PewterDropTop]

its the l32.

[01PewterDropTop]

how di i set it up "right"??

[01PewterDropTop]

i just want to tune my MAF like described in RUSS K's OL MAF tuning.

[Rynoman2k3]

Try this config.

I added my WB for giggles but you can adj it to whatever you like. It's for using with the Russ K Method.

[01PewterDropTop]

what version of HPTuners are you using it says it cant open any of the tables they where writen with a newer version of hptuners? i have 2.22.

[01PewterDropTop]

weird it opened on my desktop just fine. but not my laptop ohwell ill just copy the config

[01PewterDropTop]

now it will not load at all. this is odd, do you have air fuel ratio cammanded Hi res? this does not exist in my hptuner? in the table display. the histog page is completly blank they are all undefined

[Rynoman2k3]

2.23 Beta. It's what came with my suite! You can request it from Bill.

[01PewterDropTop]

ok i cant load it what all do you have to to to make the histogram work? i am getting tired of not being able to get this to work. i apreciate your help.

[01PewterDropTop]

do i have to remove anything from any displays?

[Rynoman2k3]

Make sure you have the correct PID's setup when you make your histogram. You really otta upgrade to 2.23. I can send you configs all day long but you can't use them unless you upgrade.

What do you mean by not make it work? Does it say this is not compatible or something like that ?